Différences
Ci-dessous, les différences entre deux révisions de la page.
Les deux révisions précédentesRévision précédenteProchaine révision | Révision précédente | ||
audio_intel_hda [Le 05/08/2017, 13:02] – [Asus] ajout ux21e 90.89.37.73 | audio_intel_hda [Le 24/01/2021, 23:55] (Version actuelle) – [Asus] 91.172.107.26 | ||
---|---|---|---|
Ligne 1: | Ligne 1: | ||
+ | | ||
+ | ---- | ||
+ | ====== Intel High Definition Audio ====== | ||
+ | |||
+ | [[Wp> High-definition_audio | HDA Intel]] est une spécification développée par Intel pour remplacer le codec [[wp> AC97 | AC97 codec]]. Cette spécification utilise la dernière puce Intel, elle est aussi utilisée par d' | ||
+ | |||
+ | Ce chipset audio est automatiquement reconnu. Toutefois, selon votre modèle, il vous faudra effectuer quelques manipulations au niveau de votre configuration pour que votre son fonctionne correctement. | ||
+ | |||
+ | Si vous ne connaissez pas le modèle exact de votre chipset audio, saisissez la [[: | ||
+ | < | ||
+ | |||
+ | Et pour avoir le chipset : | ||
+ | |||
+ | < | ||
+ | |||
+ | Ou bien, comme le paquet alsa-base est déjà présent sur votre système, tapez la commande : | ||
+ | < | ||
+ | |||
+ | Vous aurez alors une liste de **chips**, comprenant des sous-listes de **noms de | ||
+ | |||
+ | Vous pouvez connaître le nom de votre **chip** en ouvrant un terminal, et en tapant : < | ||
+ | |||
+ | Vous verrez alors, au dessus du mixeur, les noms de votre carte et de votre **chip**. | ||
+ | Il ne vous restera plus qu'à vous reporter à sa sous-liste. | ||
+ | |||
+ | |||
+ | **Le modèle le plus courant est //" | ||
+ | |||
+ | Si l' | ||
+ | |||
+ | |||
+ | ===== Vérifications ===== | ||
+ | |||
+ | |||
+ | ==== Niveaux de volume ==== | ||
+ | |||
+ | Ça paraît évident, mais parfois la carte son reste muette simplement parce que le volume est à zéro. Certaines cartes son ont de nombreux niveaux réglables : vérifiez-les **tous**. Dans le // | ||
+ | Cette petite vérification pourra peut-être vous éviter bien des maux de tête à essayer la manipulation décrite ci-dessous ;) | ||
+ | |||
+ | ==== Options du BIOS ==== | ||
+ | |||
+ | Une autre erreur possible qui peut empêcher le son de fonctionner est due à une option disponible dans le BIOS. Au démarrage, entrez dans votre BIOS et vérifiez que l' | ||
+ | |||
+ | |||
+ | ===== Configuration ===== | ||
+ | |||
+ | Si vous n'avez pas de son, c'est probablement dû au fait que ALSA n'a pas choisi automatiquement le bon modèle pour votre carte. | ||
+ | |||
+ | ==== Fichier de configuration ==== | ||
+ | |||
+ | [[: | ||
+ | |||
+ | Dans ce fichier de configuration, | ||
+ | |||
+ | options snd-hda-intel model=***** | ||
+ | |||
+ | < | ||
+ | |||
+ | Il s'agit du pointeur DMA. | ||
+ | * ' | ||
+ | * ' | ||
+ | * ' | ||
+ | |||
+ | Utiliser généralement l' | ||
+ | </ | ||
+ | |||
+ | Ce qui vous donne : | ||
+ | |||
+ | options snd-hda-intel model=***** position_fix=* | ||
+ | |||
+ | Vous pouvez également ajouter à la fin de ce fichier : (facultatif ?) | ||
+ | < | ||
+ | alias snd-card-0 snd-hda-intel | ||
+ | alias sound-slot-0 snd-hda-intel | ||
+ | alias sound-slot-0 snd-card-0 | ||
+ | alias sound-service-0-0 snd-mixer-oss | ||
+ | alias sound-service-0-1 snd-seq-oss | ||
+ | alias sound-service-0-3 snd-pcm-oss | ||
+ | alias sound-service-0-8 snd-seq-oss | ||
+ | alias sound-service-0-12 snd-pcm-oss | ||
+ | </ | ||
+ | Redémarrez ensuite pour avoir du son (si vous avez toutefois choisi un modèle compatible). | ||
+ | |||
+ | |||
+ | |||
+ | ===== Listes d' ordinateurs et la solution ===== | ||
+ | |||
+ | < | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ==== Acer ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | Aspire 2930 Z | //N/C// | options snd-hda-intel model=auto position_fix=0 (micro interne non fonctionnel) | | ||
+ | | Aspire 3054 | ALC883 | options snd-hda-intel model=auto | | ||
+ | | Acer 9810 | ALC883 | soptions snd-hda-intel model=acer position_fix=0 | | ||
+ | | Aspire 3410-724G32n | ALC269 | options snd-hda-intel model=lifebook (micro interne non fonctionnel)| | ||
+ | | Aspire 4937G | //N/C// | ajout de " | ||
+ | |Aspire 5750ZG| //N/C// | ajout de " | ||
+ | | Aspire 5738ZG | ALC888 | Voir ici: | ||
+ | | Aspire 5520G | ALC268 | options snd-hda-intel model=Realtek_ALC268 position_fix=1 probe_mask=1 | | ||
+ | | Aspire 5600 | ALC883/ | ||
+ | | Aspire 5720Z | //N/C// | options snd-hda-intel model=acer + linux-backports-modules installé | | ||
+ | | Aspire 5920G | ALC888 | options snd-hda-intel model=acer + linux-backports-modules installé, fonctionne mais son plus faible que sous vista | | ||
+ | | Aspire 5720G-1A2G25Mi| //N/C// | options snd-hda-intel model=acer + linux-backports-modules installé | | ||
+ | | Aspire 6530 | ALC888 | options snd-hda-intel model=auto (pour activer la sortie casque)| | ||
+ | | Aspire 7720G-5A4G32M | ALC268 | natif sous hardy, sauf problème au retour de l' | ||
+ | | Aspire 7730G-654G100Mn | ALC888 | options snd-hda-intel model=auto, tout est ok sauf le subwoofer du portable | | ||
+ | | Aspire 7736ZG-444G50Mn | ALC888 | options snd-hda-intel model=acer-aspire-7730g | | ||
+ | | Aspire 8920G-6A4G32Bn | ALC889 | Pour ce modele et le 6920G ce tutorial fonctionne a merveille http:// | ||
+ | | Aspire 9805WKHi | ALC883 | son uniquement sur la sortie casque, les enceintes intégrées ne fonctionnent pas | | ||
+ | | Aspire 9810 | ALC883/ | ||
+ | | Aspire 9813WKMI | ALC883 | options snd-hda-intel model=acer + linux-backports-modules installé | | ||
+ | | Aspire AX3400 | ALC888 | options snd_hda_intel model=auto enable=1 index=0 (testé uniquement sortie son HP, HDMI non testé) | | ||
+ | | Swift 1 SF114-32-P6M2 | ALC256 | options snd-hda-intel probe_mask=1 pour éviter l' | ||
+ | | TMC200 | ALC260 | options snd-hda-intel model=Realtek ALC260 | | ||
+ | | TravelMate | ALC260/ | ||
+ | ==== Alienware ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | Area-51 m15x | Intel 82801H (ICH8 Family) HD Audio Controller (rev 4)| options snd-hda-intel model=lenovo-101e | | ||
+ | |||
+ | ==== Apple ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | iMac7,1 (Intel iMac en alu de mi-2007) | ALC889A | options snd-hda-intel model=imac24 **ou** options snd-hda-intel model=mbp3 | | ||
+ | |MacPro | ALC889A | options snd-hda-intel model=imac24 **ou** options snd-hda-intel model=hp-laptop | | ||
+ | | Intel iMac | STAC9220/ | ||
+ | | Intel iMac (nouvelle génération) | STAC9220/ | ||
+ | | Intel iMac 27" | CS4206 | options snd-hda-intel model=imac27 | | ||
+ | | Intel iMac 21,5 " oct 2009 | Chip generic 10de NVidia MCP79/MCP7A HDMI cad une puce Cirrus Logic | pas de son sous Ubuntu, installer linux-backport-modules-alsa*-generic et mettre à jour Alsa en suivant ces instructions : [[http:// | ||
+ | | Intel Mac Book | STAC9220/ | ||
+ | | Intel Mac Book Pro 1ère Génération | STAC9220/ | ||
+ | | Intel Mac Book Pro 2ème Génération | STAC9220/ | ||
+ | | Intel Mac Mini | STAC9220/ | ||
+ | | Intel Mac Type 1 | STAC9220/ | ||
+ | | Intel Mac Type 2 | STAC9220/ | ||
+ | | Intel Mac Type 3 | STAC9220/ | ||
+ | | Intel Mac Type 4 | STAC9220/ | ||
+ | | Intel Mac Type 5 | STAC9220/ | ||
+ | |||
+ | ==== Asus ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | A52F | Intel IbexPeak HDMI | options snd-hda-intel model=hp-laptop | | ||
+ | | A52J K52JE | CONEXANT Analog | options snd-hda-intel model=thinkpad | | ||
+ | | A6JA | AD1986A | options snd-hda-intel model=laptop-eapd | | ||
+ | | A6J | AD1986A | options snd-hda-intel model=laptop-eapd | | ||
+ | | A6T | ALC660 | prise casque fonctionne avec options snd-hda-intel model=asus | | ||
+ | | A6VA | ALC880 | options snd-hda-intel model=z71v position_fix=1 | | ||
+ | | A6VC | ALC880 | options snd-hda-intel model=z71v position_fix=1 | | ||
+ | | A6VM | ALC880 | options snd-hda-intel model=asus position_fix=1 | | ||
+ | | A6VM-Q020H | ALC880 | options snd-hda-intel model=z71v position_fix=1 | | ||
+ | | A7J | ALC882/ | ||
+ | | A7M | ALC882/ | ||
+ | | A7C | ALC882 | options snd-hda-intel model=asus-a7m position_fix=0 | | ||
+ | | A7Sv | ALC882 | options snd-hda-intel model=6stack-dig donne les 4HP sans casque tandis que options snd-hda-intel model=auto donne 2HP + casque| | ||
+ | | A7Sn | ALC882/ | ||
+ | | E202S | CONEXANT CX20751/ | ||
+ | | Eee PC ep20 | ALC662/ | ||
+ | | Eee PC P701 | ALC662/ | ||
+ | |EEEpc 2001B |Realtek ALC887 | options snd-hda-intel model=auto index=0 | | ||
+ | | Eee PC X101CH | ALC269VB | options snd-hda-intel model=headset-mic (Avec cela le haut-parleur est OK mais le microphone est encore inutilisable. Suivez mon tutoriel en anglais pour réparer le Haut-Parleur, | ||
+ | | Eee PC 1005-HA | ALC269 | options snd-hda-intel model=auto (résout le problème de sortie haut-parleur active quand un casque est branché) | | ||
+ | | F2 (Série) | ALC660/ | ||
+ | | F3 (Série) | ALC660/ | ||
+ | | F3JC-AP036H | ALC660/861 | options snd-hda-intel model=uniwill-m31 mais la prise casque ne fonctionne pas ni le micro intégré ; pour moi tout fonctionne avec : options snd-hda-intel model=asus-laptop | | ||
+ | | F3JM | ALC861 | options snd-hda-intel model=uniwill-m31 donne les HP intégrés uniquement tandis que options snd-hda-intel model=asus-laptop donne les HP + casque | | ||
+ | | F3JP-AP005H | ALC861VD | options snd-hda-intel model=lenovo | | ||
+ | | F3JV-AP003H | Intel 82801G | options snd-hda-intel model=lenovo mais le micro intégré ne fonctionne pas | | ||
+ | | F3JV-AP030M | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | | F3Sa | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | | F3SC | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | | F6V | ALC662 | options snd-hda-intel model=3stack-dig position_fix=0 | ||
+ | | F7F | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | |F7J | ALC663 | options snd-hda-intel model=lenovo position_fix=1 | | ||
+ | | F7SR X70s | ALC861 | options snd-hda-intel model=lenovo | | ||
+ | | F80L | ALC662| options snd-hda-intel model=3stack-dig position_fix=0| | ||
+ | | F9DC | ALC861 | options snd-hda-intel model=lenovo | | ||
+ | | F3SA-AS064C | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | | G1 | Intel 82801G (ICH7 Family) HDA Controller (rev 02) | options snd-hda-intel model=lenovo : Son enceintes intégrées ou externes (fiche Jack) ok. | | ||
+ | | G50V | ALC663 | options snd-hda-intel model=m51va position_fix=0 | | ||
+ | | G51VX | ALC663 | options snd-hda-intel model=m51va position_fix=0 | | ||
+ | | G60VX | ALC663 | options snd-hda-intel model=m51va position_fix=0 | | ||
+ | | G71V | ALC663 | options snd-hda-intel model=g71v | | ||
+ | | G712LU | ALC294 | options snd-hda-intel model=asus-zenbook | | ||
+ | | G732LWS | ALC294 | options snd-hda-intel model=asus-zenbook | | ||
+ | | G732LXS | ALC294 | options snd-hda-intel model=asus-zenbook et suppression du dossier ~/ | ||
+ | | K42dr | ALC259 | ||
+ | | M3N78-CM | ALC1200 | options snd-hda-intel position_fix=0 // | ||
+ | | M50VM| ALC663| options snd-hda-intel model=3stack-dig position_fix=0| | ||
+ | | M51S | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | | M51SN | ALC660-VD | options snd-hda-intel model=3stack-660-digout (sans ' | ||
+ | | M51VA | ALC662/ | ||
+ | | N10J| ALC662| options snd-hda-intel model=3stack-dig position_fix=0| | ||
+ | | N53J et N73sv| AL259| options snd-hda-intel model=auto position_fix=0| | ||
+ | | N55sf et N76vm | - | options snd-hda-intel model=asus-mode4 | | ||
+ | | N80VN | ALC663 | options snd-hda-intel model=g71v| | ||
+ | | N82JQ | ALC259 | options snd-hda-intel model=auto position_fix=0| | ||
+ | | P5N-E SLI | ALC883 | options snd-hda-intel model=3stack-6ch-dig | | ||
+ | | P52Jc | Intel IbexPeak HDMI | options snd-hda-intel model=hp-laptop | | ||
+ | | P8Z68Vpro | Realtek ALC892 HDMI | options snd-hda-intel model=dell-headset-multi | | ||
+ | | R510C | Intel PantherPoint HDMI | options snd-hda-intel model=auto position_fix=0 | | ||
+ | | U5F 2B065H | Intel 82801G | options snd-hda-intel model=laptop-eapd | | ||
+ | | UX21E | ALC269VB | options snd-hda-intel model=laptop-amic (nécessite un adaptateur jack TRRS 4 pins)| | ||
+ | | V1S | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | | V1J | AD198x | options snd-hda-intel power_save=10 power_save_controller=N position_fix=1 model=3stack | | ||
+ | | VX1 Lamborghini (5E008P-A) | AD1986A | options snd-hda-intel model=3stack | | ||
+ | | VX2S Lamborghini | ALC861 | options snd-hda-intel model=lenovo | | ||
+ | | W1V | ALC880 | options snd-hda-intel model=asus-w1v | | ||
+ | | W2JC | ALC882/ | ||
+ | | W2VC | ALC880 | options snd-hda-intel model=3stack-dig avec installation de (sudo apt-get install) alsa-utils alsa-tools alsa-tools-gui pavucontrol alsamixer + sudo hdajackretask pour avoir du son sur la sortie casque source : http:// | ||
+ | | X5DAB | VIA VT1708S | Veuillez suivre cette méthode [[http:// | ||
+ | | X5DIJ | 82801I | Veuillez suivre cette méthode [[http:// | ||
+ | | X42F | ALC269 | options snd-hda-intel model=lifebook | | ||
+ | | X42J | ALC269 | options snd-hda-intel model=lifebook | | ||
+ | | X52JB | Conexant CX20585 | options snd-hda-intel model=thinkpad | | ||
+ | | X52JE | Conexant CX20585 | options snd-hda-intel model=thinkpad | | ||
+ | | X57VN| ALC663| options snd-hda-intel model=g50v position_fix=0 | ||
+ | | X59 | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | | X71SL| ALC663| options snd-hda-intel model=3stack-dig position_fix=0| | ||
+ | | X73SL| ALC663| options snd-hda-intel model=3stack-dig position_fix=0| | ||
+ | |X77J|ALC663| options snd-hda-intel model=3stack-dig position_fix=0| | ||
+ | | Z71V | ALC880 | options snd-hda-intel model=z71v | | ||
+ | ==== Axxiv ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | NG12 | ALC268 | Fonctionne sans config sous Karmic | | ||
+ | |||
+ | ==== Benq ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | ED8 | ALC262 | options snd-hda-intel model=benq | | ||
+ | | R55E | Conexant 5045 | options snd-hda-intel model=benq | | ||
+ | | T 31 | ALC262 | options snd-hda-intel model=benq-t31 | | ||
+ | |||
+ | ==== Clevo ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | m520g | ALC880 | options snd-hda-intel model=clevo | | ||
+ | | m540je | ALC883/ | ||
+ | | m550je | ALC883/ | ||
+ | | m665n | ALC880 | options snd-hda-intel model=clevo | | ||
+ | | M720 | ALC883/ | ||
+ | | M720R | 82801H ICH8 Family ALC883 | Compilation de ALSA 1.0.16 pour que la sortie casque fonctionne . options snd-hda-intel model=auto | | ||
+ | :q==== Dell ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | Dimension E520 | 82801H ICH8 Family | options snd-hda-intel model=dell-3stack | | ||
+ | | Inspiron E1505n | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m25 | | ||
+ | | Inspiron E1705 | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m27 | | ||
+ | | Inspiron 530 | ALC883/ | ||
+ | | Inspiron 630m | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m21 | | ||
+ | | Inspiron 640m | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m21 | | ||
+ | | Inspiron 1501 | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m26 | | ||
+ | | Inspiron 15-5578 | ALC3253 | options snd-hda-intel model=headset-mic probe_mask=0x103 | ||
+ | | Inspiron 9400 | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m27 | | ||
+ | | Latitude D620 | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m22 | | ||
+ | | Latitude D820 | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m22 | | ||
+ | | Latitude 120L | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m24 | | ||
+ | | Optiplex 780 | chipset 82801JD/DO (ICH10 Family) | ? | | ||
+ | | Precision M90 | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m23 | | ||
+ | | Precision M4300 | 82801H (ICH8 Family) | linux-backports-modules | | ||
+ | | Precision T3400 | AD1984 | options snd-hda-intel model=dell | | ||
+ | | Precision 7510 | ALC3235 | options snd-hda-intel model=dell | | ||
+ | | Vostro 1510 | 82801H ICH8 Family (ALC268) | options snd-hda-intel model=acer : le micro externe fonctionne, pas l' | ||
+ | | XPS L501x | Realtek ALC665 | enceintes internes ne fonctionnent pas: télécharger la mise à jour sur http:// | ||
+ | | XPS M1210 | Intel 82801G, STAC9221 | options snd-hda-intel model=dell-m82 //ok, mais le micro ne fonctionne pas// | | ||
+ | | XPS M1330 | 82801H (ICH8 Family) STAC9228 | options snd-hda-intel model=dell-bios //ok pour le micro externe, mais pas pour les frontals// | | ||
+ | | XPS M1710 | 82801H (ICH8 Family) STAC9200 | options snd-hda-intel model=dell-m23 | | ||
+ | | Studio 1555 | 82801I (ICH9 Family) STAC92XX | options snd-hda-intel model=dell-m6 | | ||
+ | | Studio 1557 | | options snd-hda-intel model=dell-m6 | | ||
+ | | Studio 1558 | IDT 92HD73C1X5 | options snd-hda-intel model=dell-m6 | | ||
+ | | Studio 1745 | 82801I (ICH9 Family), STAC92xx, IDT 92HD73C1X5 | options snd-hda-intel model=dell-m6 (a résolu problème d' | ||
+ | | Studio 1749 | | options snd-hda-intel model=dell-m6 // J'ai de bien meilleurs résultats avec la ligne suivante :// options snd-hda-intel model=dell-m6-dmic (à la place de l' | ||
+ | | Studio XPS 1647 | IDT 92HD73C1X5 (ICH10 Family) STAC92XX | options snd-pcsp index=-2 ; alias snd-card-0 snd-hda-intel ; alias sound-slot-0 snd-hda-intel ; options snd-hda-intel model=dell-m6 ; options snd-hda-intel enable_msi=1 //(les insérer en passant une ligne à chaque ";" | ||
+ | | Vostro 220s |82801JI (ICH10) Realtek ALC662 | Karmic 9.10 et précédent : suivre procédure forum : http:// | ||
+ | | Vostro 1700 |82801H (ICH8) STAC9205 | options snd-hda-intel model=dell-m42 probe_mask=1 position_fix=1 | | ||
+ | | Vostro 1014 | 82801I (ICH9 Family) | options snd-hda-intel model=dell-vostro | | ||
+ | |||
+ | ==== emachines (Acer) ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | emachines G620 | Realtek ALC268 | options snd-hda-intel model=Realtek_ALC268 position_fix=1 probe_mask=1 | | ||
+ | |||
+ | ==== Fujitsu Siemens ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | Amilo Pi 1536 | ALC880 | options snd-hda-intel model=fujitsu | | ||
+ | | Amilo Pi 2515 | ALC883/ | ||
+ | | Amilo Pi 2530 et XA 1526 | ALC883 | options snd-hda-intel position_fix=1 model=6stack-dig **ou** options snd-hda-intel model=lenovo-nb0763 | | ||
+ | | Amilo XA 1526 | ALC883 | options snd-hda-intel model=6stack-dig | | ||
+ | | Amilo Xi 1526 | ALC880 | options snd-hda-intel model=fujitsu\\ //Haut parleur OK, prise casque OK, molette volume OK.// | | ||
+ | | Amilo Xi 1546 | Intel HDA ; Realtek ALC880 ; 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) | **HP et micro internes : OK ; Prises casque et micro : OK ; Molette volume : OK** 8-) alias snd-card-0 | | ||
+ | | LifeBook S7020 | ALC260 | options snd-hda-intel model=fujitsu | | ||
+ | | LifeBook T1010 | Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) / Realtek ALC269 | options snd-hda-intel model=quanta\\ //Permet d' | ||
+ | | Esprimo Mobile D9510 | Intel Corporation 82801I (ICH9 Family) / Realtek ALC262 | options snd-hda-intel model=benq-t31 (ou sony-assamd ou hippo) //Active le casque et met en sourdine les haut-parleurs | ||
+ | |Amilo Xi 2528 | Intel HDA 82801H (ICH8 Family) ALC883 | options snd-hda-intel enable_msi=0 position_fix=3 | ||
+ | |||
+ | ==== Gateway ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | MX6930h | STAC9250 | compiler ALSA 1.0.19 ou supérieur | | ||
+ | | NX860 | STAC9202/ | ||
+ | |||
+ | ==== Gericom ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | x5 force p14g | chipset sonore Via VT8233 | options snd-pcm-oss dsp_map=1 | | ||
+ | |||
+ | ==== Haier ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | W66 | ALC883/ | ||
+ | |||
+ | ==== HCL ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | MiLeap | ALC262 | options snd-hda-intel model=quanta-il1 | | ||
+ | ==== HP ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | |2133 | AD194A | ||
+ | |2530p | ||
+ | |4310s | ||
+ | |6730b | ||
+ | |6730s | ||
+ | |6830s | ||
+ | |6930p | ||
+ | | Compaq Presario CQ61 | Intel 82801I (ICH9 Family) (rev 03) | options snd_hda_intel power_save=0 | | ||
+ | | Compac NC4200 | AD1981B | options snd-hda-intel model=HP et options snd-hda-intel model=mobile | | ||
+ | | Compaq nx6320 | AD1981 | options snd-hda-intel model=hp | | ||
+ | | Compaq T5735 Thin Client | ALC262 | options snd-hda-intel model=hp-tc-t5735 | | ||
+ | | EliteDesk 800 G2 | ALC221 | ajout de " | ||
+ | | G62 | Intel 82801I (ICH9 Family) HD Audio Controller (rev 03) | son uniquement au casque | | ||
+ | | G72 | Intel 5 Series/3400 Series | linux-backports-modules-alsa-lucid-generic installé pour activer les HP intégrés (sinon casque uniquement) | | ||
+ | | HDX16-1040el | Intel 82801I ICH9 | options snd-hda-intel model=hp-m4 | | ||
+ | | Pavilion tx2670ef et 2520ef | ALC268 | options snd-hda-intel index=0 model=toshiba position_fix=1 (ubuntu intrepid). J'ai du utiliser model=3stack pour faire fonctionner la sortie SPDIF (Digital Output) | | ||
+ | | Pavilion dv4-1115ef | Intel 82801I | '' | ||
+ | | Pavilion DV6-2140ef | STAC92xx | options snd-hda-intel model=hp-dv5 Testé sous 12.04. Sans cette ligne, lorsque l'on branche les écouteurs, les hauts parleurs continuent de diffuser du son. | | ||
+ | | Pavilion dv6-1123sf | STAC92xx | options snd-hda-intel model=hp-dv5 Testé sous 12.04. Sans cette ligne, lorsque l'on branche les écouteurs, les hauts parleurs continuent de diffuser du son. | | ||
+ | | Pavilion DV6560 | //N/C// | options snd-hda-intel model=hp position_fix=1 probe_mask=1 | | ||
+ | | Pavilion DV6000 | ALC268 | linux-backports-modules | | ||
+ | | Pavilion DV6560EZ | //N/C// | options snd-hda-intel model=hp position_fix=1 probe_mask=1 | | ||
+ | | Pavilion DV6585 | //N/C// | aucun son | | ||
+ | | Pavilion dv3 | Intel 82801I ICH9 | options snd-hda-intel enable_msi=1 model=hp-m4 / compiler alsa 1.0.20 | ||
+ | | Pavilion DV5_1007ef | 92HD71B | son uniquement au casque sous Jaunty. Corrigé avec : options snd-hda-intel model=hp-m4 | | ||
+ | | Pavilion DV7_1145ef | Intel 82801I | options snd-hda-intel enable_msi=1 | | ||
+ | | Pavilion DV7_1199ef | Intel 82801I | options snd-hda-intel enable_msi=1 | | ||
+ | | Pavilion DV7_1245ef | Intel 82801I | options snd-hda-intel enable_msi=1 | | ||
+ | | Pavilion DV7_1030eb | Intel 82801I | options snd-hda-intel enable_msi=1 | | ||
+ | | Pavilion DV7-1050ef | Intel 82801I | options snd-hda-intel single_cmd=1 (son Ok - ajout à ligne démarrage kernel, " | ||
+ | | Pavilion DV7-1035ef | Intel 82801I | options snd-hda-intel model=hp position_fix=1 / probe_mask=1 /options snd-hda-intel single_cmd=1 / options snd-hda-intel enable_msi=1 / " | ||
+ | | Pavilion DV7-1103ef | Intel 82801I ICH9 | options snd-hda-intel enable_msi=1 | | ||
+ | | Pavilion DV7-1060ez | Intel 82801I ICH9 | compiler alsa 1.0.19 | ||
+ | | Pavilion DV8-1210ef | Intel 5 Series/3400 Series | options snd-hda-intel model=hp position_fix=1, | ||
+ | | Pavillon DV9649ef | 82801H (ICH8 Family) rev 03 | options snd-hda-intel model=Realtek_ALC268 position_fix=1 probe_mask=1 power_save=10 power_save_controller=N | | ||
+ | | Pavillon DV9649em | 82801H (ICH8 Family) rev 03 | options snd-hda-intel model=Realtek_ALC268 position_fix=1 probe_mask=1 power_save=10 power_save_controller=N | | ||
+ | | Pavilion M6-1063SF |INTEL ITD 92HD91BXX| aucun sons malgré plusieurs commandes testées| | ||
+ | | Pavilion TX1000 | ALC660VD/ | ||
+ | |ProBook 4710s | Intel 82801I ICH9 | options snd-hda-intel model=mobile | | ||
+ | | rp5700 | ALC262 | options snd-hda-intel model=hp-rp5700 | | ||
+ | | TouchSmart IQ500fr | Intel 82801H (ICH8 family) Audio Controller | options snd-hda-intel model=touchsmart | | ||
+ | | TouchSmart IQ522fr | Intel 82801I (ICH9 family) HD Audio Controller | options snd-hda-intel model=mobile | | ||
+ | | xw4400 | ALC262 | options snd-hda-intel model=hp-bpc | | ||
+ | | xw6400 | ALC262 | options snd-hda-intel model=hp-bpc | | ||
+ | | xw8400 | ALC262 | options snd-hda-intel model=hp-bpc | | ||
+ | | xw9400 | ALC262 | options snd-hda-intel model=hp-bpc | | ||
+ | | ZBook 15 G6 | Intel Corporation Cannon Lake PCH cAVS (rev 10) | options snd-hda-intel dmic_detect=0 | | ||
+ | | Omen 15-axXXXXX | ||
+ | | | ||
+ | ==== Lenovo ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | 3000 C200 | ALC660VD/ | ||
+ | | 3000 N100 | AD1986A | options snd-hda-intel model=laptop-automute | | ||
+ | | 3000 y410 | ALC262 | options snd-hda-intel model=lenovo-3000 | | ||
+ | | Ideapad G560 | Conexant CX20585 | options snd-hda-intel model=ideapad | | ||
+ | | Thinkpad T60 | AD1981 | options snd-hda-intel model=thinkpad | | ||
+ | | Thinkpad T61 | AD1984 | options snd-hda-intel model=thinkpad | | ||
+ | | ThinkPad W500 | Intel 82801I ICH9 | options snd-hda-intel enable_msi=1 | | ||
+ | | ThinkPad X60 | Analog Devices AD1981, Intel Corporation 82801G (ICH7 Family) | ||
+ | | Thinkpad X61 | AD1984 | options snd-hda-intel model=thinkpad | | ||
+ | | ThinkPad X300 | | options snd-hda-intel model=thinkpad | | ||
+ | | Thinkpad Z60 | AD1981 | options snd-hda-intel model=thinkpad | | ||
+ | | Ideapad Y530 | Intel 82801I ICH9 | options snd-hda-intel model=lenovo-sky | | ||
+ | |||
+ | ==== LG ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | LW20 | ALC880 | options snd-hda-intel model=lg-lw | | ||
+ | | LW25 | ALC880 | options snd-hda-intel model=lg-lw | | ||
+ | | LW75 | CMI9880 | options snd-hda-intel model=full_dig | | ||
+ | | P1 | ALC880 | options snd-hda-intel model=lg | | ||
+ | |||
+ | ==== Medion ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | MD 96232 | STAC9200 | options snd-hda-intel model=oqo | | ||
+ | | MD 96290 | ALC883 | options snd-hda-intel power_save=10 power_save_controller=N model=auto | | ||
+ | | MD 96304 | STAC9200 | options snd-hda-intel model=gateway | | ||
+ | | MD 96640 | ALC888 | options snd-hda-intel model=auto ([[https:// | ||
+ | | MD96367 | ALC268/ | ||
+ | | MD96728 | ALC268/ | ||
+ | | MD96850 | Intel 82801H (ICH8 Family) HD Audio Controller (rev 3)| options snd-hda-intel model=lenovo-101e | | ||
+ | | MD96970 | ALC268/ | ||
+ | | X6811 MD97651 | ALC888 | options snd-hda-intel model=medion | | ||
+ | |||
+ | ==== MiTAC ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | 8252D | ALC883/ | ||
+ | ==== MSI ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | GX720 | ALC888 | options snd-hda-intel model=targa-dig | | ||
+ | | GX740 | ALC888 | options snd-hda-intel model=medion | | ||
+ | | GX600 | ALC888 | options snd-hda-intel model=targa-dig | | ||
+ | | GX620 | ALC883 | options snd-hda-intel model=targa-dig | | ||
+ | | GX660R | ALC883 | options snd_hda_intel model=targa-8ch-dig | | ||
+ | | GT725 | ALC1200 | options snd-hda-intel model=targa-dig | | ||
+ | | EX710 | ALC888 | options snd-hda-intel model=targa-dig | | ||
+ | | PR210 | ALC883 | options snd-hda-intel model=targa-dig | | ||
+ | | VR700 Megabook | 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) | options snd-hda-intel model=targa-dig | | ||
+ | |||
+ | <note warning> | ||
+ | tout pourri avec micro... Si quelqu' | ||
+ | ==== Nec ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | Versa P570 | ALC888 | options snd-hda-intel model=targa-dig | | ||
+ | | Versa M370 | ALC888 | options snd-hda-intel model=targa-dig | | ||
+ | |||
+ | ==== Packard Bell ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | EasyNote MX65-100 | ||
+ | | EasyNote MX65-U-044w MX66-208 MX67-U-009W | AD1986A | options snd-hda-intel position_fix=1 model=3stack | | ||
+ | | Easynote MX67-U-054W | AD1986A | options snd-hda-intel model=3stack | | ||
+ | | Easynote MZ35-V-013 | ALC861 HD | options snd-hda-intel model=3stack | ||
+ | | Easynote MZ35-V-096W | ALC861 HD | options snd-hda-intel position_fix=1 model=dallas| | ||
+ | | Easynote MZ36-V | ALC862 HD | ok | | ||
+ | | Easynote BG 46 P 018 | ALC660-VD | options snd-hda-intel model=lenovo | | ||
+ | | Easynote MT-85-M-011FR | ALC662| options snd-hda-intel model=3stack-dig position_fix=0 | | ||
+ | | Easynote SB 85 | Conexant (Venice, 5045) | options snd-hda-intel model=portable position_fix=1 | | ||
+ | | Easynote BG48-AU-190FR | vendu comme Realtek ALC272 reconnu comme ALC662| Tout OK avec " | ||
+ | | Easynote ML-61 B 007FR | Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) ALC272| Tout ok (merci à SL65 en bas ;)) options snd-hda-intel model=g71v + options snd-hda-intel enable_msi=1 | | ||
+ | | Easynote ML-65 M 008FR | Intel Corporation 82801I (ICH9 Family) HD AudiEasynoo Controller (rev 03) ALC272| Tout ok (merci à SL65 en bas ;)) options snd-hda-intel model=g71v + options snd-hda-intel enable_msi=1, | ||
+ | | Easynote SL 65 M-014FR | Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) ALC272| Tout ok (HP, casque, micro, | ||
+ | | Easynote RS65 M O23FR | ALC663 | options snd-hda-intel model=m51va position_fix=0 (tout ok on peut rajouter les alias mais pas necessaires. Penser a redemarrer apres apres changement de l' | ||
+ | | Easynote MB 87 | Conexant CX20549 (Venice) | options snd-hda-intel model=laptop-hpmicsense (son casque, haut-parleurs et micro ok !) |e | ||
+ | | Ixtreme 5987 | ALC880 | options snd-hda-intel model=5stack position_fix=1 | | ||
+ | | Easynote W8933 | ALC260 | Pas de son dans les HP, son très faible dans la prise casque, alsamixer ne présente pas de réglage volume pour les HP et la sortie casque. Débrancher la nappe des boutons lumineux du bandeau au dessus du clavier et tout fonctionne. (faire glisser sur le coté droit pour moi)(valable pour w8210 et surement la série correspondante)| | ||
+ | | Packard Bell DOTS-C-261G32nuw | ALC269VB | Pas de son dans le casque, ou coupure du son dans le casque aléatoire sous Ubuntu 12.04.*(( Ubuntu 12.04, 12.04.1, 12.04.2, 12.04.3, 12.04.4, cependant le bug a été rencontré sous Ubuntu 12.04.4. )). Veuillez appliquer le correctif, spécialement build pour Ubuntu 12.04.*(( Pour Ubuntu 12.04, 12.04.1, 12.04.2, 12.04.3, 12.04.4 .)) : https:// | ||
+ | ==== Panasonic ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | Toughbook CF-74 | STAC9200 | options snd-hda-intel model=panasonic | | ||
+ | |||
+ | ==== PC Barebone ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | N1212 | ALC861 | options snd-hda-intel model=uniwill-m31 + linux-backports-modules | | ||
+ | |||
+ | ==== Quanta ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | IL1 | ALC262 | options snd-hda-intel model=quanta-il1 | | ||
+ | |||
+ | ==== Samsung ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | M50 | AD1986A | options snd-hda-intel model=laptop | | ||
+ | | Q1 Ultra | ALC262/ | ||
+ | | Q35 | AD1986A | options snd-hda-intel model=3stack | | ||
+ | | R65 | AD1986A | options snd-hda-intel model=laptop-eapd | | ||
+ | |||
+ | ==== Shuttle ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | XS35V2 | 92HD81B1X5 | options snd-hda-intel model=dell-m6 position_fix=0 | | ||
+ | ==== Sony ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | Vaio AR | STAC9872 | options snd-hda-intel model=vaio-ar (avec noyau 2.6.35-30; le noyau 2.6.38-x bug)| | ||
+ | | Vaio FE41M | Intel 82801G | options snd-hda-intel model=laptop-eapd | | ||
+ | | Vaio FE550G | STAC9872 | options snd-hda-intel model=vaio | | ||
+ | | Vaio SZ110 | STAC9872 | options snd-hda-intel model=vaio | | ||
+ | | Vaio UX-90s | ALC262 | options snd-hda-intel model=hippo | | ||
+ | | VGC-LA1 | STAC9872AKD | options snd-hda-intel model=vaio position_fix=0 | | ||
+ | | VGN-FW11S | ALC262 | options snd-hda-intel model=sony-assamd| | ||
+ | | VGN-FW21E | ALC262 | options snd-hda-intel model=sony-assamd | | ||
+ | | VGN-FZ18M | STAC9872AK | options snd-hda-intel model=sony-ar + linux-backports-modules | | ||
+ | | VGN-FZ18E | STAC9872AK | options snd-hda-intel model=vaio | | ||
+ | | VGN-FZ11E | STAC9872AK | options snd-hda-intel model=vaio position_fix=0 | | ||
+ | | VGN-FZ11M | STAC9872AK | options snd-hda-intel model=vaio | | ||
+ | | VGN-FZ21M | STAC9872AK | options snd-hda-intel model=vaio | | ||
+ | | VGN-FZ31Z | STAC9872AK | options snd-hda-intel model=vaio | | ||
+ | | VGN-FZ31E | STAC9872AK | options snd-hda-intel model=vaio | | ||
+ | | VGN-Nr11M/S | ALC262 | options snd-hda-intel model=sony-assamd , je n'ai pas testé moi-même mais quelqu' | ||
+ | | VGN-NR21E/S | ALC262 | options snd-hda-intel model=sony-assamd position_fix=0 | | ||
+ | | VGN-NS12M/W | ALC262 | options snd-hda-intel model=sony-assamd | | ||
+ | | VGN-AR51E | SigmaTel CXD9872AKD | options snd-hda-intel model=vaio-ar , les HP intégrées ne se coupent pas quand je branche le casque| | ||
+ | | VGN-AR71S | ALC262 | options snd-hda-intel model=vaio , j'ai du installer gnome-alsamixer (dépôt univer) et cocher les case caputure et Mic Jack pour le son du casque Internal Mic pour le micro frontale | | ||
+ | | VGN-S3HP | ALC260 | Je n' | ||
+ | | VGN-SZ61MN| Intel 82801H | options snd-hda-intel model=vaio | | ||
+ | | VGN-W12M1E| ALC262 | options snd-hda-intel model=auto ou options snd-hda-intel model=toshiba-s06 | | ||
+ | |VPCM12M1E| ALC259 | options snd-hda-intel model=lenovo position_fix=0 et tous les alias (utiles ?) : tout fonctionne à merveille /!\ fonctionnel après MAJ 2.6.32-25 et installation des backports.... | | ||
+ | | VGN-Z série | | options snd-hda-intel model=sony-alc889a Si ca ne donne toujours rien (pas de son), essayez avec " | ||
+ | |||
+ | |||
+ | ==== Toshiba ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | A200-1DR | ALC861VD | options snd-hda-intel position_fix=1 model=lenovo | | ||
+ | | A200-1DT | ALC861 | options snd-hda-intel position_fix=1 model=lenovo | | ||
+ | | A200 18W | ALC861 | options snd-hda-intel model=3stack | | ||
+ | | A200-18W | ALC861DV | options snd-hda-intel position_fix=1 model=lenovo | | ||
+ | | A200-1PD | ALC861DV | options snd-hda-intel model=toshiba | | ||
+ | | A200-1LM | Intel 82801G | options snd-hda-intel position_fix=1 model=lenovo | | ||
+ | | A200 13M | ALC268 | options snd-hda-intel model=acer | | ||
+ | | A200-1VC | ALC268 (Intel ICH8) | options snd-pcsp index=-2 alias snd-card-0 snd-hda-intel alias sound-slot-0 snd-hda-intel options snd-hda-intel model=toshiba options snd-hda-intel enable_msi=1 options snd-hds-intel index=0 options sdn-hda-intel position_fix=1 | ||
+ | | L30-105 | ALC861VD | options snd-hda-intel position_fix=1 model=dallas | | ||
+ | | L30-106 | ALC861 | options snd-hda-intel model=dallas | | ||
+ | | L30-11E | ALC861VD | options snd-hda-intel position_fix=1 model=dallas | | ||
+ | | L300-14G | ALC268 | options snd-hda-intel model=toshiba | | ||
+ | | P200-1 | ALC268 | options snd-hda-intel model=toshiba | | ||
+ | | P200-1G7 | ALC268 | options snd-hda-intel model=toshiba position_fix=0 | | ||
+ | | P200-1E3 | ALC268 | options snd-hda-intel model=inv-dmic | ||
+ | | Satellite A205 | ALC267/ | ||
+ | | Satellite U205 | AD1981 | options snd-hda-intel model=toshiba | | ||
+ | | Satellite L45-SP2036 | AD1986A | options snd-hda-intel model=laptop position_fix=0 | | ||
+ | | Satellite L655D | Conexant CX20585 | options snd-hda-intel model=thinkpad | | ||
+ | | Satellite R630-148 | ALC269 | options snd-hda-intel model=auto | | ||
+ | | TECRA S4 | Intel 82801G | options snd-hda-intel model=laptop-eapd | | ||
+ | | TECRA S10-11L | ALC268 | options snd-hda-intel model=toshiba | | ||
+ | | Qosmio G40 | ALC262 | options snd-hda-intel model=auto | | ||
+ | | Qosmio X500 | Conexant ID 5067 | options snd-hda-intel model=auto | | ||
+ | | NB200-11L | ALC262 | options snd-hda-intel model=auto | | ||
+ | | Satellite P200-1JY | ALC268 | options snd-hda-intel model=inv-dmic | | ||
+ | | Satellite P500 | Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)| options snd-hda-intel model=auto, enable_msi=1 | | ||
+ | |||
+ | ==== Zepto ==== | ||
+ | ^ Modèle ^ Chipset ^ Méthode ^ | ||
+ | | Titan | ALC267/ | ||
+ | | Znote | ALC267/ | ||
+ | |||
+ | ---- | ||
+ | |||
+ | // |